Drilling bailer

Guarantee for well 36 months.

Vozmozhnoe well-drilling on water by hand to 20m.

Transport charges are paid separately.

For the serve of water from a mining hole we recommend to use the domestic pumpings stations Dolphin Fjswm 15m/24cl Power, KVt 1,1 Max. productivity, m3/chas, 3,0 Max pressure, 55m

Cost 130 $ with connecting.

Obustroystvo of mining hole (priyamok)

  of Priyamok from reinforce-concrete 2kh rings and hatch.

These works are produced flow of 1 working day.

Helpful information

Drilling wells close proximity to the house (but not closer than 3 m) facilitate the settlement of water and digging of trenches to a depth of frost penetration. The new well on the sand should be located as far as possible from the previously made, or an increased total water intake in this part of the aquifer will reduce the productivity of each well. Water, frozen inside the pipe will not hurt her; Polyethylene pipes have less stiffness, so in the high seismic activity of countries, such as Japan, steel pipes underground installation replaced with polyethylene by law. A downhole filter – water intake portion of the well – is a perforated tube with a wire-wound and clamped thereon by means of a filter grid lock. Unfortunately, the quality of water from underground sources does not always correspond to the current SanPiN drinking water. The most common problems is the presence in water of natural compounds of iron and hardness. The presence of iron in the water making it unsuitable for use in drinking and domestic and industrial purposes. In many cases, simultaneously with iron in these waters contains manganese and hydrogen sulfide, which also have a negative impact on the quality of the source water. hardness salts form a stubborn attack on the plumbing and tiles, scum in the water heating devices, build-up on the internal surfaces of pipes. Such growths interfere with the water current, clog valves and valves, causing premature wear of pipes and appliances, which have direct contact with hard water: boilers, washing machines, hot tubs, etc. In addition, hard water adversely affects the woven fabrics, dry skin and hair, suggests an increased consumption of detergents. Filter wells are drilled in the first aquifer, which lies in the sands. Sand production rate of wells is not large (up to 1,000 l / h). Along with this there is a drawback, and even more significant – life. Such well quickly silted sand, despite the presence of the filter. Their service life is typically up to 10-15 years, depending on the fraction of sand body. But they also have advantages – small depth and, accordingly, the high cost. On the ecology and water quality. Artesian ( “limestone”) aquifers are at a depth of 30-130 meters or more from the surface “dirt” to protect their clay layers. Of course, no heavy metals or nitrates or phenols in them are not detected. Sand slurry is also available. About Bacterial contamination generally can be no question: there is no oxygen, experts called artesian water “dead”. But the high content of iron, salts of fluorine and stiffness are often encountered. Drillers at once, at the stage of conclusion of the contract, do not assume any responsibility for the quality of the water. Otherwise, it can not be: no one knows what kind of “minerals” is fraught with your site. Simply ordering artesian well, we must be prepared, and to the acquisition of the water treatment system. Speaking of “deposits”. According to the law, before the drill hole “in the limestone”, it is necessary to take permission from the authorities to use the “bowels of the earth.” Project approval is usually borne by the customer, and so he is free to spend any extra money for it, or not spend. Sometimes coordination cost exceeds the cost of the well.

to hit a well, to punch a well, rope drilling of wells